Buick Regal: Manual Mode - Starting and Operating - Driving and Operating - Buick Regal Owners ManualBuick Regal: Manual Mode

Driver Shift Control (DSC)

Notice: If you drive the vehicle at a high rpm without upshifting while using Driver Shift Control (DSC), you could damage the vehicle. Always upshift when necessary while using DSC.

DSC allows you to shift an automatic transmission similar to a manual transmission. To use the DSC feature:

DSC allows you to shift an automatic transmission similar to a manual transmission. To use the DSC feature:

1. Move the shift lever to the left from D (Drive) into the side gate marked with (+) and (−).
2. Press the shift lever forward to upshift or rearward to downshift.

While using the DSC feature, the vehicle will have firmer, quicker shifting. You can use this for sport driving or when climbing or descending hills, to stay in gear longer, or to downshift for more power or engine braking.

The transmission will only allow you to shift into gears appropriate for the vehicle speed and engine revolutions per minute (rpm). The transmission will not automatically shift to the next lower gear if the engine rpm is too high, nor to the next higher gear when the maximum engine rpm is reached.

While in the DSC mode, the transmission will automatically downshift when the vehicle comes to a stop. This will allow for more power during take-off.

When accelerating the vehicle from a stop in snowy and icy conditions, you may want to shift into second gear. A higher gear allows the vehicle to gain more traction on slippery surfaces.

    Automatic Transmission
    The automatic transmission has a shift lever located on the console between the seats. The mode or selected gear is shown in the instrument cluster P (Park): This position locks the drive wheels ...

    Manual Transmission
    This is the shift pattern for the six-speed manual transmission. To operate the transmission: Notice: Do not rest your hand on the shift lever while driving. The pressure could cause premature wea ...

    See also:

    Record your key number
    The key code number is stamped on the bar code tag attached to the key set. Should you lose your keys, this number will enable an authorized HYUNDAI dealer to duplicate the keys easily. Remove the ...

    Basic sound settings
    Press SOUND to display the basic sound setting menu (Bass, Treble, etc). Continue pressing SOUND or OK/MENU to display the other setting alternatives. Adjust the setting by turning TUNE and save th ...

    Remote control storage compartment
    Opening Press on the cover. Remote control storage compartment Storage is possible in a vertical position in the center armrest. ...