Nissan Maxima: Measurement of weights
Secure loose items to prevent weight shifts that could affect the balance of your vehicle. When the vehicle is loaded, drive to a scale and weigh the front and the rear wheels separately to determine axle loads. Individual axle loads should not exceed either of the gross axle weight ratings (GAWR). The total of the axle loads should not exceed the gross vehicle weight rating (GVWR). These ratings are given on the vehicle certification label. If weight ratings are exceeded, move or remove items to bring all weights below the ratings.
Loading tips
-The GVW must not exceed GVWR or GAWR as specified on the F.M.V.S.S./C.M.V.S.S.
certification label.
- Do not load the front and rear axle to the GAWR. Doing so will exceed the GVWR.
WARNING:
- P ...
Towing a trailer
WARNING:
Overloading or improper loading of a trailer and its cargo can adversely affect
vehicle handling, braking and performance and may lead to accidents.
CAUTION:
- Do not tow a trailer or ha ...
See also:
Reporting safety defects (USA)
If you believe that your vehicle has a defect which could cause a crash or could
cause injury or death, you should immediately inform the National Highway Traffic
Safety Administration (NHTSA) in ...
Lower Anchor and Top Tether Anchor Locations
Rear Seat
(Top Tether Anchor):
Seating positions with top tether anchors.
(Lower Anchor): Seating positions with two lower anchors.
To assist you in locating the lower anchors, each rear anc ...
Power Steering Fluid (2.4L L4 Engine)
The vehicle has electric power
steering and does not use power
steering fluid. ...
