NOTE: The sales code is located on the lower right sideof the unit’s faceplate.

The REN, RER and RBZ radios contain a CD/DVDplayer, USB port, and a 30-gigabyte hard drive (HDD).

Sirius Satellite Radio is optional. The 6.5 in (16.5 cm)touch screen allows for easy menu selection.

The RER radio also contains a Global Positioning System(GPS)-based Navigation system.

Refer to your Uconnect™ Multimedia REN, RER or RBZuser’s manual for detailed operating instructions.

Operating Instructions — Voice CommandSystem — If Equipped

Refer to “Voice Command” in the Uconnect™ UserManual located on the DVD for further details.

Operating Instructions — Uconnect™ Phone —If Equipped

Refer to “Uconnect™ Phone” in the Uconnect™ UserManual located on the DVD for further details.

Clock Setting Procedure — RBZ Radio

To Manually Set the Clock

1. Turn on the radio.

2. Touch the screen where the time is displayed, the clocksetting menu will appear on the screen.

3. To move the hour forward, touch the screen where theword “Hour” with the arrow pointing upward is displayed.

To move the hour backward, touch the screenwhere the word “Hour” with the arrow pointing downwardis displayed.

4. To move the minute forward, touch the screen wherethe word “Min” with the arrow pointing upward isdisplayed. To move the minute backward, touch thescreen where the word “Min” with the arrow pointingdownward is displayed.

5. To save the new time setting, touch the screen wherethe word “Save” is displayed.

Changing Daylight Savings Time

When selected, this feature will display the time of day indaylight savings time. Proceed as follows to change thecurrent setting:

1. Turn on the radio.

2. Touch the screen where the time is displayed. Theclock setting menu will appear on the screen.

3. When this feature is on, a check mark will appear inthe box next to the words “Daylight Savings.” Touch thescreen where the words “Daylight Savings” are displayedto change the current setting.

Show Time if Radio is Off

When selected, this feature will display the time of dayon the touch screen when the radio is turned off. Proceedas follows to change the current setting:

1. Turn on the radio.

2. Touch the screen where the time is displayed. Theclock setting menu will appear on the screen.

3. When this feature is on, a check mark will appear inthe box next to the words “Show Time if Radio is Off.”Touch the screen where the words “Show Time if Radio isOff” are displayed to change the current setting.

Changing the Time Zone

1. Turn on the radio.

2. Touch the screen where the time is displayed. Theclock setting menu will appear on the screen.

3. Touch the screen where the words “Set Time Zone” aredisplayed. The time zone selection menu will appear onthe screen.

4. Select a time zone by touching the screen where yourselection appears. If you do not see a time zone that youwant to select, touch the screen where the word “Page” isdisplayed to view additional time zones in the menu.

5. Touch the screen where the word “Save” is displayed.

Clock Setting Procedure — RER/REN Radio

Uconnect gps — RER Only

The GPS receiver used in this system is synchronized tothe time data being transmitted by the GPS satellite. Thesatellite clock is Greenwich Mean Time (GMT). This is theworldwide standard for time. This makes the system’sclock very accurate once the appropriate time zone anddaylight savings information is set.

To Manually Set the Clock — RER/REN

1. Turn on the radio.

2. Touch the screen where the time is displayed.

3. Touch the screen where “User Clock” is displayed, theclock setting menu will appear on the screen.

4. To move the hour forward, touch the screen where theword “Hour” with the arrow pointing upward is displayed.

To move the hour backward, touch the screenwhere the word “Hour” with the arrow pointing downwardis displayed.

5. To move the minute forward, touch the screen wherethe word “Min” with the arrow pointing upward isdisplayed. To move the minute backward, touch thescreen where the word “Min” with the arrow pointingdownward is displayed.

6. To save the new time setting, touch the screen wherethe word “Save” is displayed.

Changing Daylight Savings Time

When selected, this feature will display the time of day indaylight savings time. Proceed as follows to change thecurrent setting:

1. Turn on the radio.

2. Touch the screen where “User Clock” is displayed, theclock setting menu will appear on the screen.

3. When this feature is on, a check mark will appear inthe box next to the words “Daylight Savings.” Touch thescreen where the words “Daylight Savings” are displayedto change the current setting.

Show Time if Radio is Off

When selected, this feature will display the time of dayon the touch screen when the radio is turned off. Proceedas follows to change the current setting:

1. Turn on the radio.

2. Touch the screen where the time is displayed.

3. Touch the screen where “User Clock” is displayed, theclock setting menu will appear on the screen.

4. When this feature is on, a check mark will appear inthe box next to the words “Show Time if Radio is Off.”Touch the screen where the words “Show Time if Radio isOff” are displayed to change the current setting.

Changing the Time Zone

1. Turn on the radio.

2. Touch the screen where the time is displayed.

3. Touch the screen where “User Clock” is displayed, theclock setting menu will appear on the screen.

4. Touch the screen where the words “Set Time Zone” aredisplayed. The time zone selection menu will appear onthe screen.

5. Select a time zone by touching the screen where yourselection appears. If you do not see a time zone that youwant to select, touch the screen where the word “Page” isdisplayed to view additional time zones in the menu.

6. Touch the screen where the word “Save” is displayed.