Hyundai Sonata: Mode selection
The mode selection button controls the direction of the air flow through the ventilation system.
The air flow outlet port is converted as follows:
Air flow is directed toward the upper body and face. Additionally, each outlet can be controlled to direct the air discharged from the outlet.
Air flow is directed towards the face and the floor.
Most of the air flow is directed to the floor, with a small amount of the air being directed to the windshield and side window defrosters.
Most of the air flow is directed to the floor and the windshield with a small amount directed to the side window defrosters.
Most of the air flow is directed to the windshield with a small amount of air directed to the side window defrosters.
Heating and air conditioning
1. Start the engine.
2. Set the mode to the desired position. To improve the effectiveness of heating
and cooling :
- Heating:
- Cooling:
3. Set the temperature control to the desired position. ...
MAX A/C-Level (B, D)
To operate the MAX A/C, turn the temperature knob to extreme left. Air flow is
directed toward the upper body and face. In this mode, the air conditioning and
the recirculated air position will ...
See also:
Entering the vehicle while it is running via remote start
1. Unlock the vehicle doors using the remote keyless entry system. If the vehicle’s
doors are unlocked manually using the key, the vehicle’s alarm system will trigger
(if the alarm system is a ...
Display
Up to 12 characters can be displayed at a time.
If there are 13 characters or more, pressing and holding
for 1 second
or more will display the remaining characters.
A maximum of 24 characters ca ...
Stowing cargo
▷ Heavy cargo: stow as far forward and as low
as possible, ideally directly behind the cargo
area separating wall.
▷ Very heavy cargo: when the rear seat is not
occupied, secure e ...
