Nissan Altima: Moonroof
When power window switch does not operate
If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system:
1. Place the ignition switch in the ON position.
2. Open the window more than halfway by operating the power window switch.
3. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed.
4. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete. The power window automatically opens or closes depending on if the automatic down or up function is selected.
5. Perform steps 2 through 4 above for other windows. If the power window function does not operate properly after performing the above procedure, see a NISSAN dealer for assistance.
Auto-reverse function
If the control unit detects something caught in the
window as it is closing, the window will be immediately
lowered.
The auto-reverse function can be activated when
the window is closed by automat ...
Automatic moonroof
The moonroof will only operate when the ignition
switch is placed in the ON position. The automatic
moonroof is operational for about 45 seconds,
even if the ignition switch is placed in the
ACC ...
See also:
Compass zone adjustment
Compass calibration zones
1. Refer to the “Compass calibration zones” map shown above to verify that the
compass zone setting is correct for your geographical location.
2. Press and hold the ...
Changing a wheel
Flat tire
The "Breakdown assistance" section contains information and notes
on how to deal with a flat tire. It also provides
instructions on changing a wheel or mounting
the spare wh ...
A/C – ON/OFF
When the indicator light
in the button is on, the air conditioning is controlled automatically. This cools/heats
and dehumidifies the incoming air. When the indicator light in the button is off,
...
