Subaru Legacy: Odometer - Meters and gauges - Instruments and controls - Subaru Legacy Owners ManualSubaru Legacy: Odometer

This meter displays the odometer when the ignition switch is in the “ON” position.

This meter displays the odometer when the ignition switch is in the “ON” position. The odometer shows the total distance that the vehicle has been driven.

If you press the trip knob when the ignition switch is in the “LOCK” or “Acc” position, the odometer/trip meter will light up. If you do not press the trip knob within 10 seconds of illumination of the odometer/ trip meter, the odometer/trip meter will turn off.

Also, if you open and close the driver’s door within 10 seconds of illumination of the odometer/trip meter, the odometer/trip meter will turn off.

    Speedometer
    The speedometer shows the vehicle speed. ...

    Double trip meter
    1) Trip knob This meter displays the two trip meters when the ignition switch is in the “ON” position. The trip meter shows the distance that the vehicle has been driven since you last set ...

    See also:

    Add Names To Your Uconnect™ Phonebook
    NOTE: Adding names to the Uconnect™ Phonebook is recommended when the vehicle is not in motion. • Press the button to begin. • After the “Ready” prompt and the following beep, say ...

    To Arm The System
    1. Remove the keys from the ignition switch and get out of the vehicle. 2. Lock the door using either the power door lock switch (one door must be open) or the LOCK button on the Remote Keyless ...

    Cruise control
    Steering wheel-mounted controls and display 1 - Standby mode 2 - Resume set speed 3 - Deactivating 4 - Activate/set speed 5 - Set speed indicator (parentheses indicate standby mode) Engaging ...