Volvo S60: On and off
To switch Collision Warning on or off, press MY CAR on the center console control panel and go to Settings Car settings Driver support systems Collision Warning. If Collision Warning is on, the system will perform a self-test each time the engine is started by briefly illuminating the warning light. See page 134 for more information about the menu system.
When the engine is switched on, the Collision Warning setting that was being used when it was switched off will be the default setting.
Operation
Settings are made by pressing MY CAR on the center console control panel and using the menus displayed. ...Activating/deactivating warning signals
The collision warning system’s visual signals are activated automatically when the engine is started if the collision warning system is switched on. The audible warning signal can be activated/ d ...See also:
Introduction
The HomeLink1 Wireless Control System provides a convenient way to replace up
to three hand-held radio-frequency (RF) transmitters used to activate devices such
as gate operators, garage door op ...
USB Port
For vehicles with a USB port, the following devices may be connected and controlled by the infotainment system:
► iPods
► PlaysForSure Devices (PFD)
► USB Drives
► Zunes ...
Maintaining/storing the speed
Press the button.
When the system is switched on, the
current speed is maintained and stored as the
desired speed.
It is displayed in the speedometer and briefly
displayed in the instrument c ...