Ford Fusion: Opening and closing the bonnet
Opening the bonnet
1. Pull the lever.
2. Raise the bonnet slightly and pull thecatch towards you.
3. Open the bonnet and support it withthe strut.
Closing the bonnet
Note: Make sure that the bonnet isclosed properly.
Lower the bonnet and allow it to dropfrom under its own weight for the last20 – 30 centimetres.
General information
Have your vehicle serviced regularly tohelp maintain its roadworthiness andresale value. There is a large network ofFord Authorised Repairers that are thereto help you with their professionalservicing ...
Engine compartment overview - 1.25L Duratec-16V (Sigma)/1.4L Duratec-16V
(Sigma)/1.6L Duratec-16V (Sigma)
A. Engine coolant reservoir*: See Engine coolant check.
B. Brake and clutch fluid reservoir (right-hand drive)*: See Brake and clutch
fluid check.
C. Engine oil filler cap*: See Engine oil check ...
See also:
Tire sealing system–temporarily repairing a flat tire
Temporarily repairing a flat tire is done in two stages:
• Stage 1: The hole is sealed by pumping sealing compound into the tire. The
car is then driven a short distance to distribute the seali ...
Care of CDs and DVDs
Sound quality can be reduced due
to disc quality, recording method,
quality of the music recorded, and
how the disc has been handled.
Handle discs carefully and store
them in their original c ...
General information
CAUTIONS:
Use only approved wheel and tyresizes. Using other sizes coulddamage the vehicle and will makethe National Type Approval invalid.
If you change the diameter of thetyres from that fitted at ...
