Mercedes-Benz E-Class: Opening and closing the side 
windows - Side windows - Opening/closing - Mercedes-Benz E-Class Owners ManualMercedes-Benz E-Class: Opening and closing the side windows

1. Front left

1. Front left
2. Front right
3. Rear right
4. Rear left

The switches for all side windows are located on the driver's door. There is also a switch on each door for the corresponding side window.

The switches on the driver's door take precedence.

i The side windows cannot be operated from the rear when the override feature for the side windows is activated.

•► Turn the SmartKey to position 1 or 2 in the ignition lock.

•► To open: press the corresponding switch.

•► To close: pull the corresponding switch.

If you press the switch beyond the point of resistance, an automatic opening/ closing process is started in the corresponding direction. You can stop automatic operation by operating the switch again.

You can continue to operate the side windows after you switch off the engine or remove the SmartKey. This function is available for up to five minutes or until the driver's or front-passenger door is opened.

    Important safety notes
    WARNING When opening or closing the door windows, make sure that there is no danger of anyone being harmed by the opening/closing procedure. The door windows are equipped with automatic ...

    Convenience opening feature
    You can ventilate the vehicle before you start driving. To do this, the key is used to carry out the following functions simultaneously: - unlock the vehicle - open the side windows - ope ...

    See also:

    Child Restraint Systems
    (A) Rear-Facing Infant Seat A rear-facing infant seat (A) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a ...

    Summary
    The camera is activated when the gear selector is moved to R (this can be changed in the MY CAR menu) and the image is shown on the center console display. When backing up, two solid lines are ...

    R (Reverse)
    This position is for backing the vehicle. To shift from the “N” to “R” position, stop the vehicle completely then move the lever to the “R” position. ...