Subaru Legacy: Operating the driver’s window

Subaru Legacy / Subaru Legacy Owners Manual / Keys and doors / Windows / Power window operation by driver / Operating the driver’s window

1) Automatically open/close

1) Automatically open/close
2) Open/close

To open:

Press the switch down lightly and hold it. The window will open as long as the switch is held.

This switch also has a one-touch auto down function that allows the window to be opened fully without holding the switch. Press the switch down until it clicks and release it, and the window will fully open. To stop the window halfway, pull the switch up lightly.

To close:

Pull the switch up lightly and hold it. The window will close as long as the switch is held.

For some models, this switch also has a one-touch auto up function that allows the window to be closed fully without holding the switch.

Pull the switch up until it clicks and release it, and the window will fully close. To stop the window halfway, press the switch down lightly.

NOTE

If the vehicle’s battery is disconnected due to situations such as battery or fuse replacement, the one-touch auto up/down function is deactivated. Initialize the power window to reactivate the one-touch auto up/down function. Refer to “Initialization of power window” F2-23.

Driver’s side power window switches

1) Lock switch 2) For driver’s window 3) For front passenger’s window 4) For rear left passenger’s window 5) For rear right passenger’s window All door windows can be controlled by the ...

Anti-entrapment function

CAUTION ● Never attempt to test this function using fingers, hands or other parts of your body. ● The anti-entrapment function may not operate properly if some object gets trapped ju ...