Nissan Altima: Operating tips
● When the shift selector is shifted to R (Reverse),
the monitor screen automatically
changes to the RearView Monitor mode.
However, the radio can be heard.
● It may take some time until the RearView
Monitor is displayed after the shift selector
has been shifted to R (Reverse). Objects
may be distorted momentarily until the Rear-
View Monitor screen is displayed completely.
When the shift selector is returned to
a position other than R (Reverse), it may take
some time until the screen changes. Objects
on the screen may be distorted until they are
completely displayed.
● When the temperature is extremely high or
low, the screen may not clearly display objects.
This is not a malfunction.
● When strong light directly enters the camera,
objects may not be displayed clearly.
● Vertical lines may be seen in objects on the
screen. This is due to strong reflected light
from the bumper. This is not a malfunction.
● The screen may flicker under fluorescent
light. This is not a malfunction.
● The colors of objects on the RearView Monitor
may differ somewhat from those of the
actual object.
● When the contrast of objects is low at night,
pressing the SETTING button or ENTER
button may not change the brightness.
● Objects on the monitor may not be clear in a
dark place or at night.
● If dirt, rain or snow attaches to the camera,
the RearView Monitor may not display objects.
Clean the camera.
● Do not use alcohol, benzine or thinner to
clean the camera. This will cause discoloration.
To clean the camera, wipe with a cloth
dampened with a diluted mild cleaning agent
and then wipe with a dry cloth.
● Do not damage the camera as the monitor
screen may be adversely affected.
● Do not use body wax on the camera window.
If body wax does get on the camera window,
wipe off the wax with a clean cloth dampened
with mild detergent diluted with water.
Adjusting the screen
Type A The procedure for adjusting the quality of the screen differs depending on the type of screen present on the vehicle. For vehicles without a touch screen (Type A): ● To adjust the ...Vents
Right and Left Adjust air flow direction by moving the vent slides. Open or close the vents by using the dial. Move the dial toward the to open the vents or toward the to close them. Cen ...See also:
Total trailer weight
Total trailer weight
The total trailer weight (trailer weight plus its cargo load) must never exceed
the maximum weight.
Legacy
The total trailer weight must not exceed 1,000 lbs (453 kg).
Out ...
Programming HomeLink® (for U.S. owners)
The HomeLink® compatible transceiver in your vehicle has 3 buttons
which can be programmed to operate 3 different devices. Refer to the
programming method below appropriate for the device.
...
Shift Lever Position Indicators
These indicators on the instrument
panel show which position the shift
lever is in.
Using a paddle shift mode, the gear
position indicator shows you the
selected gear number.
The ‘‘D ...