Nissan Altima: Operating tips
● Say a command after the tone. Voice commands
cannot be accepted when the icon
is .
● If the command is not recognized, the system
repeats the announcement. Repeat the
command in a clear voice.
● Press the switch on the steering
wheel to return to the previous screen.
● If you want to cancel the command, press
and hold the switch. The message,
“Voice cancelled” will be announced.
● If you want to adjust the volume of the system
feedback, push the volume control
switch on the steering wheel or use the
audio system volume knob while the system
is making an announcement.
● To minimize the amount of prompts spoken
by the system in Alternate Command Mode,
use the Minimize Voice Feedback function.
To access the Minimize Voice Feedback
function press the SETTING button, then
select the “Others” key. Then select the
“Voice Recognition” key.
Giving voice commands
1. Press and release the switch located on the steering wheel. 2. A list of commands appears on the screen, and the system announces, “Please say a command from the displayed list or say ...How to speak numbers
Voice Recognition requires a certain way to speak numbers when giving voice commands. Refer to the following examples. General rule: ● Only single digits 0 (zero) to 9 can be used. ● ...See also:
Activating/deactivating SPORT handling
mode
WARNING
The SPORT handling mode should not be
switched on during normal driving.
Switching on the SPORT handling mode will
result in the following:
- no restriction to the engine torque
...
Manual transaxle operation
The manual transaxle has 6 forward gears.
This shift pattern is imprinted on the shift knob. The transaxle is fully synchronized
in all forward gears so shifting to either a higher or a lower gear ...
Selection Of Lubricant
It is important that the proper lubricant is used in the
transmission to assure optimum transmission performance.
Use only the manufacturer’s recommended transmission
fluid. Refer to “Fluids, ...