Ford Fusion: Parking brake
Applying the parking brake
WARNING:
Make sure that the parking brake isapplied before you release the lever.
Note: Do not press the release buttonwhen you apply the parking brake.
1. Press the brake pedal firmly.
2. Pull the parking brake lever upwardsto its fullest extent.
Parking on a hill
If you have to park facing uphill, select firstgear and turn the front wheels away fromthe kerb. If you have to park facingdownhill, select reverse gear and turn thefront wheels towards the kerb.
Releasing the parking brake
1. Press the brake pedal firmly.
2. Pull the parking brake lever upwardsslightly, press the release button andpush the lever downwards.
Hints on driving with ABS
When the ABS is operating, the brakepedal will pulse. This is normal. Maintainpressure on the brake pedal.
The ABS will not eliminate the dangersinherent when:
• you drive too close to the vehicle ...
See also:
Operating Instructions — Radio Mode
NOTE:
The ignition switch must be in the ON or ACC
position to operate the radio.
Power Switch/Volume Control (Rotary)
Push the ON/VOLUME control knob to turn on the
radio. Push the ON/VOLUME c ...
Ski Pass-Through
There is a ski pass-through door located behind the rear
seat armrest that allows longer items, such as snow skis,
to be stored in the rear cargo area. Lower the armrest and
pull downward on the ...
Braking
See Brake System Warning Light .
Braking action involves perception time and reaction time. Deciding to push the brake pedal is perception time. Actually doing it is reaction time.
Average reaction ...
