Subaru Legacy: Parking on a grade - Trailer towing tips - Trailer towing - Driving tips - Subaru Legacy Owners ManualSubaru Legacy: Parking on a grade

Always block the wheels under both vehicle and trailer when parking. Apply the parking brake. You should not park on a hill or slope. But if parking on a hill or slope cannot be avoided, you should take the following steps:

1. Apply the brakes and hold the pedal down.
2. Have someone place wheel blocks under both the vehicle and trailer wheels.
3. When the wheel blocks are in place, release the regular brakes slowly until the blocks absorb the load.
4. Apply the regular brakes and then apply the parking brake; slowly release the regular brakes.
5. Shift into 1st or reverse gear (MT models) or “P” (AT and CVT models) and shut off the engine.

    Driving on grades
    ● Before going down a steep hill, slow down and shift into lower gear (if necessary, use 1st gear) in order to utilize the overheating of your vehicle’s brakes. Do not make sudden downshif ...

    See also:

    Immobilizer
    See Radio Frequency Statement  for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-210/220/310. ...

    General functions
    RADIO button for selecting the AM, FM1, FM2, Sirius1* or Sirius2* wavebands. Number key buttons (0-9) Navigate among the menu alternatives in the display by turning TUNE. Confirm your selec ...

    Fan speed control
    The ignition switch must be in the ON position for fan operation. The fan speed control knob allows you to control the fan speed of the air flowing from the ventilation system. To change the fan ...