Nissan Altima: Precautions on cruise control
● If the cruise control system malfunctions, it cancels automatically. The SET indicator light in the instrument panel then blinks to warn the driver.
● If the SET indicator light blinks, turn the cruise control switch off and have the system checked by a NISSAN dealer.
● The SET indicator light may blink when the cruise control switch is turned ON while pushing the ACCEL/RES, COAST/SET, or CANCEL switch. To properly set the cruise control system, use the following procedures.
WARNING
Do not use the cruise control when driving
under the following conditions:
● When it is not possible to keep the
vehicle at a set speed.
● In heavy traffic or in traffic that varies in
speed.
● On winding or hilly roads.
● On slippery roads (rain, snow, ice, etc.).
● In very windy areas.
Doing so could cause a loss of vehicle
control and result in an accident.
Cruise control
1. CANCEL switch 2. ACCEL/RES switch 3. COAST/SET switch 4. ON/OFF switch ...Cruise control operations
The cruise control allows driving at a speed between 25 - 89 MPH (40 - 144 km/h) without keeping your foot on the accelerator pedal. To turn on the cruise control, push the ON·OFF switch. The CRU ...See also:
Troubleshooting guide
Verify the location of all Intelligent Keys that are programmed for the vehicle.
If another Intelligent Key is in range or inside the vehicle, the vehicle system
may respond differently than expec ...
Power Windows
The ignition must be ON for the power windows to operate.
WARNING:
Make sure the opening is clear before closing a window:
Closing power windows are dangerous. A person's hands, head, or even n ...
Power door mirrors
Door mirror controls
Adjusting
1. Press the L button for the left door mirror or the R button for the right
door mirror. The light in the button comes on.
2. Adjust the position with the joysti ...