Honda Accord: Preparing to Drive - Driving - Honda Accord Owners ManualHonda Accord: Preparing to Drive

You should do the following checks and adjustments before you drive your vehicle.

1. Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice.

2. Check that the hood is fully closed.

3. Check that the trunk is fully closed.

4. Visually check the tires. If a tire looks low, use a gauge to check its pressure.

5. Check that any items you may be carrying are stored properly or fastened down securely.

6. On vehicles with power adjustable seats

Check the seat adjustment

On vehicles with manual adjustable seats

Check the seat adjustment

7. Check the adjustment of the inside and outside mirrors.

8. Check the steering wheel adjustment.

9. Make sure the doors are securely closed and locked.

10. Fasten your seat belt. Check that your passengers have fastened their seat belts.

11. When you start the engine, check the gauges and indicators in the instrument panel.

    Driving
    This section gives you tips on starting the engine under various conditions, and how to operate the manual and automatic transmissions. It also includes important information on parking your ...

    Starting the Engine
    1. Apply the parking brake. 2. In cold weather, turn off all electrical accessories to reduce the drain on the battery. 3. Manual transmission: Press the clutch pedal down all the way. The ST ...

    See also:

    Key and Lock Messages
    NO REMOTE DETECTED This message displays when the transmitter battery is weak on vehicles with keyless access. See “Starting the Vehicle with a Low Transmitter Battery” under Remote Key ...

    Safety Connect Services Information
    ●Phone calls using the vehicles Bluetooth® technology will not be possible during Safety Connect. ●Safety Connect is available beginning Fall 2009 on select Toyota models. Contact wit ...

    When the steering lock cannot be released
    The smart key system indicator light (green) will flash quickly. Check that the shift lever is set in P. Press the “ENGINE START STOP” switch while turning the steering wheel left and rig ...