Ford Fusion: Programming the remote control
A maximum of four remote controls(including the ones supplied with thevehicle) can be programmed.
To programme a new remote control:
• Turn the ignition key to position II fourtimes within six seconds.
• Switch off the ignition. A tone soundsto indicate that it is now possible toprogramme a new remote control.
• Press any button on a new remotecontrol. A tone will sound asconfirmation. Repeat this last step forall of your remote controls, includingthe original.
• Switch the ignition back on or wait forten seconds without programminganother remote control to end remotecontrol programming. Only the remotecontrols which you have justprogrammed are now able to lock andunlock your vehicle.
Re-programming the unlockingfunction
You can change the unlocking functionso that pressing the unlock button oncedeactivates the central locking or doublelocking, disarms the anti-theft alarmsystem and unlocks the driver’s door.
Pressing the unlock button twice withinthree seconds also unlocks thepassengers’ doors.
If you want the tailgate to be locked whiledriving, press the locking button on thedriver’s door to activate central locking.
In order to re-programme the function,press and hold the unlock and lockbuttons simultaneously for at least fourseconds with the ignition switched off.
The direction indicators will flash twice toindicate that the unlocking function hasbeen successfully re-programmed.
Pressing and holding both buttonssimultaneously for at least four secondsagain will change the function back.
General information on radio frequencies
CAUTION: The radio frequency used by yourremote control can also be used byother short distance radiotransmissions (e.g. amateur radios,medical equipment, wireless headphones,remote controls and alar ...Changing the remote control battery
Make sure that you dispose ofold batteries in anenvironmentally friendly way. Seek advice from your local authorityregarding recycling. If the range of the transmitter in the keydecreases graduall ...See also:
Anti-theft Alarm System
This vehicle has an anti-theft alarm system.
Arming the System
To arm the system, close all of the windows and doors and then either:
► Press on the RKE transmitter.
► Lock the vehicl ...
Headlight beam select
1 To select the high beam function, push the
lever forward. The high beam lights come on
and the light illuminates.
2 Pull the lever back to select the low beam.
3 Pulling and releasing the lev ...
Outside Temperature Indicator
If equipped
This indicator displays the outside
temperature in Fahrenheit (U.S.
models) or Celsius (Canadian
models). To see the outside
temperature, press and release the
select/reset knob ...