Subaru Legacy: Rear gate (Outback) – if the rear gate cannot be unlocked
In the event that you cannot unlock the rear gate by operating the power door locking switches or the remote keyless entry system, you can unlock it from inside the cargo area.
1. Remove the access cover at the bottom-center of the rear gate trim using flat-head screwdriver.
2. Locate the rear gate lock release lever behind the rear gate trim panel.
CAUTION
Never operate the rear gate lock release lever with your fingers because doing so may cause an injury. Always use a flat-head screwdriver or a similar tool.
3. To unlock the rear gate, turn the lever to the right position using a flat-head screwdriver or a similar tool.
4. Open the rear gate from outside by raising the rear gate handle.
Trunk lid (Legacy) – if the trunk lid cannot be opened
The trunk lid can also be opened using the key. To open the trunk lid, insert the key into the key cylinder and turn it clockwise. ...Moonroof – if moonroof cannot be closed
If the moonroof cannot be closed with the moonroof switch, you can close the moonroof manually. 1. Take out the screwdriver from the tool bucket. 2. Open the overhead console. Refer to “Overhead ...See also:
Controls
Fan control dial
The fan control dial turns the fan on and off, and
controls fan speed.
Air flow control buttons
The air flow control buttons allow you to select
the air flow outlets.
MAX
A/C
...
Setting station presets
Search for a desired station by turning
or pressing
or
.
Press and hold a button (from
to ) until you hear
a beep.
...
Passenger Sensing System
The vehicle has a passenger sensing system for the right front passenger position. The passenger airbag status indicator will be visible on the instrument panel when the vehicle is started.
The wor ...