Subaru Legacy: Recommended grade and viscosity - Engine oil - Maintenance and service - Subaru Legacy Owners ManualSubaru Legacy: Recommended grade and viscosity

CAUTION

Use only engine oil with the recommended grade and viscosity.

NOTE

Engine oil viscosity (thickness) affects fuel economy. Oils of lower viscosity provide better fuel economy. However, in hot weather, oil of higher viscosity is required to properly lubricate the engine.

    Changing the oil and oil filter
    Change the oil and oil filter according to the maintenance schedule in the “Warranty and Maintenance Booklet”. The engine oil and oil filter must be changed more frequently than listed in the ...

    Synthetic oil
    You should use synthetic engine oil that meets the same requirements given for conventional engine oil. When using synthetic oil, you must use oil of the same classification, viscosity and grade s ...

    See also:

    System alarm operation
    The alarm system will give the following alarms when triggered: ● The vehicle’s horn will sound and the turn signal lights will flash for 30 seconds. ● If any door (or the rear gate/ ...

    Seat Belt Extender
    If a seat belt is too short, even when fully extended and when the adjustable upper shoulder belt anchorage (if equipped) is in its lowest position, your authorized dealer can provide you with a ...

    Folding down the rear seatback
    WARNING ● When you fold down the seatback, check that there are no passengers or objects on the rear seat. Not doing so creates a risk of injury or property damage if the seatback suddenly ...