BMW 5 Series: Releasing
With the ignition switched on:
Manual transmission: Press the switch while the brake or clutch is pressed.
Automatic transmission: Press the switch while the brake is pressed or transmission position P is engaged.
The LED and indicator lamp go out.
The parking brake is released.
Automatic Release in cars with automatic transmission
For automatic release, operate the accelerator pedal.
The LED and indicator lamp go out.
Subject to the following requirements, the parking brake is automatically released by operation of the accelerator pedal:
▷ Engine on.
▷ Drive position engaged.
▷ Driver buckled in and doors closed.
Inadvertent operation of the accelerator
pedal
Make sure that the accelerator pedal is not operated
unintentionally; otherwise, the vehicle is
set in motion and there is a risk of an accident.◀
Setting
Pull the switch. The LED lights up. The indicator lamp lights up in red. The parking brake is set. Lower lamp: indicator lamp in Canadian models Set the parking brake and further secur ...Automatic Hold
The concept This system assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when it is s ...See also:
Reporting Safety Defects to the United States Government
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addi ...
Important safety notes
WARNING
In order to avoid possible loss of vehicle
control, all seat, head restraint, steering
wheel and rear view mirror adjustments, as
well as fastening of seat belts, must be done
bef ...
Customer Satisfaction Procedure (U.S. and Canada)
Your satisfaction and goodwill are
important to your dealer and to
Buick. Normally, any concerns with
the sales transaction or the
operation of the vehicle will be
resolved by your dealer's ...