Mercedes-Benz E-Class: Removing a wheel
AMG vehicles: during removal and repositioning of the wheel, the wheel rim can strike the ceramic-brake disc and damage it. Therefore, take precautions and get a second person to assist you.
Alternatively, you can use a second alignment bolt.
•► Unscrew the uppermost wheel bolt completely.
•► Screw alignment bolt 1 into the thread instead of the wheel bolt.
•► Unscrew the remaining wheel bolts fully.
Do not place wheel bolts in sand or on a dirty surface. The bolt and wheel hub threads could otherwise be damaged when you screw them in.
•► Remove the wheel.
Raising the vehicle
WARNING
When jacking up the vehicle, only use the jack
which has been specifically approved by
Mercedes-Benz for your vehicle.
The jack is designed exclusively for jacking up
the vehicle a ...
Mounting a new wheel
WARNING
Always replace wheel bolts that are damaged
or rusted.
Never apply oil or grease to wheel bolts.
Damaged wheel hub threads should be
repaired immediately. Do not continue to
drive ...
See also:
Rear Vision Camera (RVC)
This vehicle may have an RVC
system. Read this entire section
before using it.
The RVC system can assist the
driver when backing up by
displaying a view of the area behind
the vehicle.
WAR ...
Locking doors
1. Place the ignition switch in the LOCK position.
2. Close all doors.
3. Press the button on the
Intelligent
Key.
4. The hazard warning lights flash twice and
the horn beeps once.
5. All d ...
How to use the vehicle information display
Press the button, located on the
instrument panel just behind the steering wheel, to display the following modes:
MPG - MPG/MPH - Time/Miles - Range - Exterior Temperature - Setting - Warning
...
