Buick LaCrosse: Removing the Spare Tire and Tools - Tire Changing - Wheels and Tires - Vehicle Care - Buick LaCrosse Owners ManualBuick LaCrosse: Removing the Spare Tire and Tools

The equipment you need is located in the trunk.

1. Open the trunk.

2. Remove the spare tire cover.

3. Turn the retainer nut

3. Turn the retainer nut counterclockwise and remove the spare tire.

4. Place the spare tire next to the tire being changed.

A. Screwdriver

A. Screwdriver
B. Tow Hook (If Equipped)
C. Jack
D. Wrench (In Bag)
E. Trim Removal (If Equipped)
F. Fastener (If Equipped)

The jack and tools are stored below the spare tire.

Place the tools next to the tire being changed.

    Removing the Flat Tire and Installing the Spare Tire
    1. Do a safety check before proceeding. See If a Tire Goes Flat for more information. 2. Turn the wheel wrench counterclockwise to loosen the wheel nut caps. If needed, finish loosening th ...

    See also:

    3-zone automatic climate control
    Automatic climate control climate zones You can select different temperature settings for the driver's and front-passenger sides as well as for the rear compartment. •► Turn the Smart ...

    Speedometer
    The speedometer shows the vehicle's speed in either kilometers per hour (km/h) or miles per hour (mph). ...

    Bluetooth Hands-Free Phone System without Navigation System (if so equipped)
    WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehic ...