Buick Regal: Removing the Spare Tire and Tools - Tire Changing - Electrical System - Vehicle Care - Buick Regal Owners ManualBuick Regal: Removing the Spare Tire and Tools

To access the spare tire and tools:

1. Open the trunk.
2. Remove the spare tire cover.

3. Turn the retainer nut counterclockwise and remove the spare tire. Place the spare tire next to the tire being changed.

3. Turn the retainer nut counterclockwise and remove the spare tire. Place the spare tire next to the tire being changed.
4. The jack and tools are stored below the spare tire. Remove them from their container and place them near the tire being changed.

    Removing the Flat Tire and Installing the Spare Tire
    Take off the wheel cover or center cap, if the vehicle has one, to reach the wheel bolts. 1. Do a safety check before proceeding. See If a Tire Goes Flat  for more information. 2. Turn the wh ...

    See also:

    Problems with the windshield wipers
    The windshield wipers are obstructed Leaves or snow, for example, may be obstructing the windshield wiper movement. The wiper motor has been deactivated. •► For safety reasons, you should ...

    Front Storage
    Front Storage Pull up on the handle (A) and pull the cover down to open. ...

    Selecting the correct oil filter
    Your new NISSAN vehicle is equipped with a high-quality genuine NISSAN oil filter. When replacing, use a genuine NISSAN oil filter or its equivalent for the reason described in “Change intervals ...