Chrysler 200: Replacement Keys
NOTE:
Only keys that have been programmed to the
vehicle electronics can be used to start the vehicle. Once
a Sentry Key has been programmed to a vehicle, it
cannot be programmed to any other vehicle.
CAUTION!
Always remove the Sentry Key from the vehicle and
lock all doors when leaving the vehicle unattended.
At the time of purchase, the original owner is provided with a four-digit Personal Identification Number (PIN).
The PIN is required for authorized dealer replacement of keys. Duplication of keys may be performed at an authorized dealer or by using the Customer Key Programming procedure. This procedure consists of programming a blank key to the vehicle electronics. A blank key is one which has never been programmed.
NOTE:
When having the Sentry Key Immobilizer
System serviced, bring all vehicle keys with you to the
authorized dealer.
Sentry Key
The Sentry Key Immobilizer System prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whethe ...Customer Key Programming
You can program new keys to the system if you have two valid Sentry Keys by performing the following procedure: 1. Cut the additional Sentry Key Transponder blank(s) to match the ignition switch ...See also:
California Fuel Requirements
If the vehicle is certified to meet
California Emissions Standards, it is
designed to operate on fuels that
meet California specifications. See
the underhood emission control
label. If this ...
General maintenance
Listed below are the general maintenance items that should be performed
at the intervals specified in the “Owner's Warranty Information
Booklet” or “Owner’s Manual Supplement/Scheduled
M ...
Interior lamps
General information
The interior lamps, footwell lamps, entry lamps
and courtesy lamps are controlled automatically.
The brightness of some of these lamps is influenced
by the thumbwheel for the ...