Honda Accord: Replacing a Front Turn Signal/Parking Light Bulb
1. Open the hood.
To change the turn signal bulb on the passenger’s side, remove the engine coolant reserve tank by pulling it out of its stay.
Driver’s side on V6 models
Remove the air intake duct.
2. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise.
3. To remove the burned out bulb, push it in and turn it counterclockwise until it unlocks.
4. Install the new bulb and turn it clockwise to lock it in place.
5. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place.
6. Turn on the lights to make sure the new bulb is working.
7. Passenger’s side
Reinstall the coolant reserve tank.
Driver’s side on V6 models
Reinstall the air intake cover and duct securely. Reinstall the fastener and secure it by pushing on the head until it locks.
Replacing a Headlight Bulb
Your vehicle has halogen headlight bulbs. When replacing a bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it wi ...Replacing a Front Side Marker Light Bulb
1. To change the bulb on the driver’s side, start the engine, turn the steering wheel all the way to the right, then turn off the engine. To change the bulb on the passenger’s side, tu ...See also:
Limitations
Distance Alert uses the same radar sensor used by Adaptive Cruise Control and
the Collision Warning system. See page 160 for more information on the radar sensor’s
limitations.
NOTE
Stron ...
Video Screens
The video screens are located in the
back of the driver and front
passenger seats.
To use the video screen:
1. Push the release button located
on the seatback console.
2. Move the screen to ...
Folding Rear Seat
To provide additional storage area, the rear seatback can
be folded forward. Pull on the loops shown in the picture
to fold down either or both seatbacks.
When returning the rear seatback to the ...