Buick LaCrosse: Replacing Safety Belt System Parts after a Crash
WARNING!
A crash can damage the safety
belt system in the vehicle.
A damaged safety belt system
may not properly protect the
person using it, resulting in
serious injury or even death in a
crash. To help make sure the
safety belt systems are working
properly after a crash, have them
inspected and any necessary
replacements made as soon as
possible.
After a minor crash, replacement of safety belts may not be necessary.
But the safety belt assemblies that were used during any crash may have been stressed or damaged.
See your dealer to have the safety belt assemblies inspected or replaced.
New parts and repairs may be necessary even if the safety belt system was not being used at the time of the crash.
Have the safety belt pretensioners checked if the vehicle has been in a crash, or if the airbag readiness light stays on after you start the vehicle or while you are driving. See Airbag Readiness Light.
Safety Belt Care
Keep belts clean and dry.
WARNING!
Do not bleach or dye safety belts.
It may severely weaken them. In
a crash, they might not be able to
provide adequate protection.
Clean safety belts only wi ...
Airbag System
...
See also:
Air cleaner
The air cleaner filter should not be cleaned and reused. Replace it according
to the maintenance log shown in the NISSAN Service and Maintenance Guide.When replacing
the filter, wipe the inside ...
Fog light switch (if so equipped)
To turn the fog lights on, turn the headlight switch
to the position, then turn the fog light
switch to the position.
To turn the fog lights on with the headlight switch
in the AUTO position (if ...
Changing shift ranges in S mode
When the shift lever is in the S position, the shift lever or paddle shift
switches can be operated as follows:
Shift lever
1 Upshifting
2 Downshifting
Paddle shift switches
1 Upshifting
2 ...
