Mercedes-Benz E-Class: Reporting safety defects - Service and vehicle operation - Introduction - Mercedes-Benz E-Class Owners ManualMercedes-Benz E-Class: Reporting safety defects

If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Mercedes-Benz USA, LLC.

If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.

However, NHTSA cannot become involved in individual problems between you, your dealer, or Mercedes-Benz USA, LLC.

To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to: http://www.safercar.gov; or write to:

Administrator, NHTSA Headquarters, 1200 New Jersey Avenue, SE, West Building, Washington, DC 20590.

You can also obtain additional information about vehicle safety from: http://www.safercar.gov.

    Reporting malfunctions relevant to safety
    For the USA only: The following text is reproduced as required of all manufacturers according to Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the National Traffic and Motor ...

    Limited Warranty
    Follow the instructions in this manual about the proper operation of your vehicle as well as about possible vehicle damage. Damage to your vehicle that arises from culpable contraventions again ...

    See also:

    Power windows
    The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: 1 Closing 2 One-touch closing (driver’s window only)* 3 Opening 4 One-touch o ...

    Servicing the brakes
    If the red brake warning lamp lights up in the instrument cluster and you hear a warning tone while the engine is running, the brake fluid level may be too low. Observe additional warning messa ...

    Context help - Owner's Manual to the temporarily selected function
    The relevant information can be opened directly. Opening during operation via iDrive To move directly from the application on the Control Display to the options menu: 1. Press the button or mo ...