Nissan Altima: Resetting the moonroof switch
The moonroof switch may not operate properly and need to be reset if any of the following conditions have occurred:
● the moonroof has been manually moved,
● the moonroof motor has been removed and
reinstalled after the moonroof has been repositioned
or adjusted,
● the moonroof glass panel has been adjusted
or changed, or
● the electrical supply interrupted and/or
some malfunction has been detected.
Use the following reset procedure to return the moonroof operation to normal.
1. Place the ignition switch in the ON position.
2. Push and hold the moonroof switch
toward 2 . Once the moonroof has
reached the full tilt position, release the
switch. Push and hold the switch toward
the 2 position again. After a delay of
four seconds, the moonroof will make a small
movement and backup.
3. Release the switch.
4. Within 5 seconds of releasing the switch,
push and continuously hold the switch
toward 2 . The moonroof will move
from the tilt position to the open position and
back to the close position.
NOTE:
If the switch is released at any time during Step 4, the procedure must be restarted.
5. Release the switch. Do not place the ignition switch in the OFF position for at least 2 seconds. The moonroof is now reset. If the moonroof still does not operate properly, have the moonroof system checked by a NISSAN dealer.
Tilting the moonroof
Close the moonroof by pushing the switch toward 2 . Release the switch, then push the switch toward 2 again to tilt the moonroof up. To tilt the moonroof down, push the switch toward 1 . ...Auto-reverse function (when closing or tilting down the moonroof)
The auto-reverse function can be activated when the moonroof is closed or tilted down by automatic operation when the ignition switch is placed in the ON position or for about 45 seconds after the ...See also:
Connecting The iPod Or External USB Device
Use the connection cable to connect an iPod or external
USB device to the vehicle’s USB connector port which is
located in the center of the instrument panel below the
climate controls.
USB ...
F.M.V.S.S./C.M.V.S.S. certification label
The Federal/Canadian Motor Vehicle Safety Standard (F.M.V.S.S./C.M.V.S.S.) certification
label is affixed as shown. This label contains valuable vehicle information, such
as: Gross Vehicle Weigh ...
Occupant classification system
Type A
Type B
Your vehicle is equipped with an occupant classification system in the front
passenger's seat.
The occupant classification system is designed to detect the presence of a pro ...