Nissan Altima: Rocking a stuck vehicle - Vehicle recovery (freeing a stuck vehicle) - Towing your vehicle - In case of emergency - Nissan Altima Owners ManualNissan Altima: Rocking a stuck vehicle

WARNING

● Stand clear of a stuck vehicle.

● Do not spin your tires at high speed. This could cause them to explode and result in serious injury. Parts of your vehicle could also overheat and be damaged.

If your vehicle is stuck in sand, snow, mud, etc., use the following procedure:

1. Turn off the Vehicle Dynamic Control System.

2. Make sure the area in front and behind the vehicle is clear of obstructions.

3. Turn the steering wheel right and left to clear an area around the front tires.

4. Slowly rock the vehicle forward and backward.

● Shift back and forth between R (Reverse) and D (Drive) (CVT models) or 1st (Low) and R (Reverse) (M/T models).

● Apply the accelerator as little as possible to maintain the rocking motion.

● Release the accelerator pedal before shifting between R (Reverse) and D (Drive) (CVT models) or 1st (Low) and R (Reverse) (M/T models).

● Do not spin the tires above 35 mph (55 km/h).

5. If the vehicle cannot be freed after a few tries, contact a professional towing service to remove the vehicle.

    Pulling a stuck vehicle
    WARNING To avoid vehicle damage, serious personal injury or death when recovering a stuck vehicle: ● Contact a professional towing service to recover the vehicle if you have any questions ...

    See also:

    Function settings
    A SUBARU dealer can change the settings of the functions shown in the following table to meet your personal requirements. Contact the nearest SUBARU dealer for details. ...

    Switching the split screen on and off
    1. Press the button. 2. "Split screen" 3. Move the controller until the split screen is selected. 4. Press the controller or select "Split screen content". 5. Select the d ...

    Overdrive Operation
    The automatic transmission includes an electronically controlled Overdrive (sixth gear). The transmission will automatically shift into the Overdrive gear if the following conditions are present ...