Subaru Legacy: Scan
The scan mode lets you listen to the first 10 seconds of each track/file in succession. Press the “SCAN” button to start scanning upward beginning with the track/ file(s) following the currently selected one. After all track/file(s) in the disk/folder have been scanned, normal playback will be resumed. To cancel the scan mode, press the “SCAN” button again.
NOTE
The scan mode will be cancelled if you perform any of the following steps.
● Press the “RPT” button
● Press the “RDM” button
● Press the “RPT/RDM” button
● Turn the “TUNE/TRACK/CH” dial
● Press the “” or “”
side of the “FOLDER” button
● Press the “” button
● Press the “” or “”
side of the “SEEK” button
● Press the disc select button
● Select the radio or AUX mode
● Press the “LOAD” button when there is free space in the CD magazine
● Turn off the power of the audio
equipment
● Turn the ignition switch to the “LOCK” position
Random playback
Type A audio Type B audio To play back a track/file(s) at random, press the “RPT/RDM” button for 0.5 second or longer (type A audio) or press the “RDM” button (type B audio). ● ...Display selection
If you press the “TEXT” button during playback, the indication will change to the next one in the following sequence. For CD-DA: ...See also:
Keys
Record your key number
The key code number is stamped on the bar code tag attached to the key set.
Should you lose your keys, this number will enable an authorized KIA dealer to
duplicate the ke ...
Changing a tire with TPMS
If you have a flat tire, the Low Tire Pressure will come on. Have the flat tire
repaired by an authorized HYUNDAI dealer as soon as possible or replace the flat
tire with the spare tire.
CAUTION
...
Operating video DVD
•► Switch on COMAND and select video DVD
(see the separate operating instructions).
•► Press the button on the
steering wheel to select the Audio menu.
DVD changer display (ex ...