Subaru Legacy: Security ID plate
1) Key number plate
2) Security ID plate
The security ID is stamped on the security ID plate attached to the key set. Write down the security ID and keep it in another safe place, not in the vehicle. This number is needed to make a replacement key if you lose your key or lock it inside the vehicle.
To make replacement keys, the key number is also needed. Refer to “Key replacement” F2-4.
The security ID is also needed for replacement or repair of the engine control unit, integrated unit, combination meter (all models) and security control unit (Canada-spec. models).
Immobilizer
The immobilizer system is designed to prevent an unauthorized person from starting
the engine. Only keys registered with your vehicle’s immobilizer system can be used
to operate your vehicle. Ev ...
Security indicator light
The security indicator light deters potential thieves by indicating that the
vehicle is equipped with an immobilizer system. It begins flashing approximately
60 seconds after the ignition switch ...
See also:
Root Directory
The root directory is treated as a
folder. All files contained directly
under the root directory are
accessed prior to any root directory
folders. ...
Occupant restraints
Some of the most important safety features in yourvehicle are the restraint systems.
The following safetyfeatures are standard on all vehicles:
• Three-point lap and shoulder belts for all seatin ...
Convenience
Activating/deactivating the EASYENTRY/
EXIT feature
You can use the Easy Entry/Exit: function
to activate or deactivate the EASY ENTRY/
EXIT feature
WARNING
You must make sure no one can ...
