BMW 5 Series: Setting
Pull the switch.
The LED lights up.
The indicator lamp lights up in red. The parking brake is set.
Lower lamp: indicator lamp in Canadian models
Set the parking brake and further secure
the vehicle as required
Set the parking brake firmly when parking; otherwise,
the vehicle could roll. On steep upward
and downward inclines, further secure the vehicle,
for example, by turning the steering wheel in
the direction of the curb. ◀
While driving
Use while driving serves as an emergency braking function:
Pull the switch and hold it. The vehicle brakes hard while the button is being pulled.
The indicator lamp lights up in red, a signal sounds and the brake lamps light up.
Lower lamp: indicator lamp in Canadian models
If the vehicle is braked to a speed of approx.
2 mph/3 km/h, the parking brake remains set.
The concept
The parking brake is primarily intended to prevent the vehicle from rolling while parked; it brakes the rear wheels. ...Releasing
With the ignition switched on: Manual transmission: Press the switch while the brake or clutch is pressed. Automatic transmission: Press the switch while the brake is pressed or transmission ...See also:
Vehicles Without Wheel Covers
1. Mount the road tire on the axle.
2. Install the remaining lug nuts with the cone shaped
end of the nut toward the wheel. Lightly tighten the lug
nuts.
WARNING!
To avoid the risk of forcing t ...
Auto Door Unlocking
The auto door unlocking feature
has five possible settings:
The auto door unlocking is
deactivated all the time.
On A/T vehicles, the driver’s door
unlocks when you move the shift
lever to ...
Keys
The following keys are provided with the vehicle.
Vehicles without a smart key system (type A)
1 Master keys
2 Valet key
3 Key number plate
Vehicles without a smart key system (type B)
1 Mas ...