Chrysler 200: Shift Lever Override - What to do in emergencies - Chrysler 200 Owners ManualChrysler 200: Shift Lever Override

If a malfunction occurs and the shift lever cannot be moved out of the PARK position, you can use the following procedure to temporarily move the shift lever:

1. Firmly apply the parking brake.

2. Remove the cupholder liner.

3. Turn the ignition to the ON/RUN position without starting the engine.

4. Press and maintain firm pressure on the brake pedal.

5. Insert a screwdriver or similar tool into the hole at the front of the cupholder and push and hold the override lever forward.

6. Move the shift lever into the NEUTRAL position.

7. The vehicle may then be started in NEUTRAL.

8. Reinstall the cupholder liner.

    Freeing A Stuck Vehicle
    If your vehicle becomes stuck in mud, sand, or snow, it can often be moved by a rocking motion. Turn your steering wheel right and left to clear the area around the front wheels. Then shift back ...

    Towing A Disabled Vehicle
    Proper towing or lifting equipment is required to prevent damage to your vehicle. Use only tow bars and other equipment designed for the purpose, following equipment manufacturer’s instructi ...

    See also:

    Off-road recovery
    While driving, the right side or left side wheels may unintentionally leave the road surface. If this occurs, maintain control of the vehicle by following the procedure below. Please note that thi ...

    System Status
    Displays SYSTEM OK if there are no active Warning Messages stored. Pressing and releasing the DOWN button when SYSTEM OK is displayed will do nothing. Displays SYSTEM WARNINGS PRESENT if there ar ...

    Loading all the magazine (full disc loading mode)
    1. If you continue to press the “LOAD” button for more than 1.5 seconds, the player will produce beep sound and will enter the full disc loading mode. 2. When the disc number indicator flashe ...