Subaru Legacy: Shift lock function
The shift lock function helps prevent the improper operation of the select lever.
● The select lever cannot be operated unless the ignition switch is turned to
the “ON” position and the brake pedal is depressed.
● The select lever cannot be moved from the “P” position to any other position before
the brake pedal is depressed. Depress the brake pedal first, and then operate the
select lever.
● Only the “P” position allows you to turn the key from the “Acc” position to the
“LOCK” position and remove the key from the ignition key cylinder.
● If the ignition switch is turned to the “LOCK” position while the select lever
is in the “N” position, the select lever may not be moved to the “P” position after
a period of time. Therefore, move the select lever to the “P” position with the
brake pedal depressed soon after the ignition switch is turned to the “LOCK” position.
D (Drive)
This position is for normal driving. The transmission automatically shifts into a suitable gear according to the vehicle speed and the acceleration you require. When more acceleration is required ...Shift lock release
If the select lever cannot be operated, turn the ignition switch back to the “ON” position then move the select lever to the “P” position with the select lever button pressed and brake ped ...See also:
Trailer towing
Your vehicle is designed and intended to be used primarily as a passenger-carrying
vehicle. Towing a trailer puts additional loads on your vehicle’s engine, drivetrain,
brakes, tires and suspens ...
Switching the rear automatic climate
control on/off
1. "Settings"
2. "Climate"
3. "Rear climate control"
The rear automatic climate control is not operational
if the automatic climate control is
switched off or if t ...
Other Navigation Services
Available from OnStar
OnStar eNav: Allows subscribers
to send destinations from Google
Maps™ and MapQuest.com to their
Turn-by-Turn Navigation or
screen-based navigation system.
When ready, the directions will b ...