Subaru Legacy: Shift lock release
If the select lever cannot be operated, turn the ignition switch back to the “ON” position then move the select lever to the “P” position with the select lever button pressed and brake pedal depressed. If the select lever does not move after performing the above procedure, perform the following steps.
● When the select lever cannot be shifted from “P” to “N”:
Refer to “Shift lock release using the shift lock release button” F7-21.
● When the select lever cannot be shifted from “N” to “R”, “P”:
Within 60 seconds after placing the ignition switch in the “Acc” position, move the select lever to the “P” position with the select lever button pressed and brake pedal depressed.
If you must perform the above procedure, the shift lock system (or the vehicle control system) may be malfunctioning. Contact a SUBARU dealer for an inspection as soon as possible.
If the select lever does not move after performing the above procedure, refer to “Shift lock release using the shift lock release button” F7-21.
Shift lock function
The shift lock function helps prevent the improper operation of the select lever.
● The select lever cannot be operated unless the ignition switch is turned to
the “ON” position and the b ...
Shift lock release using the shift lock release button
Perform the following procedure to release the shift lock.
1. Apply the parking brake and stop the engine.
2. Remove the shift lock cover using a flat-head screwdriver.
3. While depressing the ...
See also:
If the moonroof does not close
Have your NISSAN dealer check and repair the
moonroof. ...
Parking lights
Headlight control in position for parking lights
The parking lights (the license plate lights also come on) can be turned on even
when the ignition is switched off.
Turn the headlight control to ...
Heated mirrors (if so equipped)
Some outside mirrors can be heated to defrost,
defog, or de-ice for improved visibility. For additional
information, see “Rear window and outside
mirror defroster switch” in the “Instruments ...
