Toyota Camry: Shifting the shift lever
Vehicles without a smart key system:
While the engine switch is in the “ON” position, move the shift lever with the brake pedal depressed.
Vehicles with a smart key system:
While the “ENGINE START STOP” switch is in IGNITION ON mode, move the shift lever with the brake pedal depressed.
When shifting the shift lever between P and D, make sure that the vehicle is completely stopped.
Automatic transmission (vehicles with paddle shift switches)
Select a shift position appropriate for the driving conditions. ...Shift position purpose
*1: To improve fuel efficiency and reduce noises, set the shift lever in the D position for normal driving. *2: Selecting shift ranges using S mode restricts the upper limit of the possible gea ...See also:
Jump-starting
WARNING
Failure to follow these directions will cause damage to the electronic
components, and can lead
to a battery explosion and severe injury or death.
Never lean over batteries while con ...
Programming A Non-Rolling Code
For programming Garage Door Openers manufactured
before 1995.
1. Turn the ignition switch to the ON/RUN position.
2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm)
away from the HomeLink ...
Voice Control System
The audio system can also be
operated by voice control. See the
navigation system manual for
complete details. ...