Chrysler 200: Six-Speed Automatic Transmission (C635) — If Equipped
The shift lever position display (located in the instrument panel cluster) indicates the transmission gear range. You must press the brake pedal to move the shift lever out of the PARK position (refer to “Brake/Transmission Shift Interlock System” in this section). To drive, move the shift lever from PARK or NEUTRAL to the DRIVE position.
The electronically-controlled transmission provides a precise shift schedule. The transmission electronics are self-calibrating; therefore, the first few shifts on a new vehicle may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles (kilometers).
Shifting from DRIVE to PARK or REVERSE should be done only after the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when moving the shift lever between these gears.
The transmission shift lever has PARK, REVERSE, NEUTRAL, DRIVE, and AutoStick shift positions. Manual shifts can be made using the AutoStick shift control (refer to “AutoStick ” in “Starting And Operating” for further information). Moving the shift lever to the left or right (-/+) while in the AutoStick position (below the Drive position) will manually select the transmission gear, and will display the current gear in the instrument cluster as 6, 5, 4, 3, 2, 1.
Shift Lever
Torque Converter Clutch
A feature designed to improve fuel economy has been included in the automatic transmission on your vehicle. A clutch within the torque converter engages automatically at calibrated speeds. This m ...Gear Ranges
DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range. ...See also:
Switching on/off manually
Switching on/off manually
Press the
button.
▷ On: the LED lights up.<>
▷ Off: the LED goes out. ...
Tire wear and damage
WARNING
● Tires should be periodically inspected
for wear, cracking, bulging
or objects caught in the tread.
If excessive wear, cracks, bulging
or deep cuts are found, the tire(s)
should b ...
Garage door opener — if equipped
HomeLink replaces up to three remote controls (handheldtransmitters) that operate
devices such as garagedoor openers, motorized gates, lighting or home securitysystems.
The HomeLink unit operates ...