Buick LaCrosse: StabiliTrak® System - Ride Control Systems - Driving and Operating - Buick LaCrosse Owners ManualBuick LaCrosse: StabiliTrak® System

The vehicle may have a vehicle stability enhancement system called StabiliTrak. It is an advanced computer-controlled system that assists with directional control of the vehicle in difficult driving conditions.

StabiliTrak activates when the computer senses a difference between the intended path and the direction the vehicle is actually traveling. StabiliTrak selectively applies braking pressure to the vehicle brakes to help steer the vehicle in the intended direction.

StabiliTrak comes on automatically whenever the vehicle is started. To assist with directional control of the vehicle, the system should always be left on.

When StabiliTrak activates, flashes on the instrument panel. flashes on the instrument panel.

A noise may be heard or vibration may be felt in the brake pedal. This is normal. Continue to steer the vehicle in the intended direction.

See Traction Control System (TCS)/StabiliTrak® Light for more information.

If a problem is detected with StabiliTrak, SERVICE STABILITRAK is displayed on the Driver Information Center (DIC).

See Ride Control System Messages. When this message is displayed and stays on, the vehicle is safe to drive comes on and stays on, the vehicle is safe to drive but the system is not operational.

Driving should be adjusted accordingly.

If the system. comes on and stays on, reset the system.

To reset:

1. Stop the vehicle.

2. Turn the engine off and wait 15 seconds.

3. Start the engine.

If vehicle needs service. still comes on and stays on, the vehicle needs service.

• To turn off both StabiliTrak and

• To turn off both StabiliTrak and TCS, press and hold the TCS/StabiliTrak button, located on the instrument panel, until and illuminate and the appropriate illuminate and the appropriate DIC message is displayed. See Ride Control System Messages.

When StabiliTrak is turned off, the system will not assist with directional control of the vehicle or limit wheel spin. Driving should be adjusted accordingly.

See Traction Control System (TCS)/StabiliTrak® Light for more information.

• Press and release the TCS/StabiliTrak button again to turn the system back on.

If cruise control is being used when StabiliTrak activates, cruise control will automatically disengage. Press the cruise control button to reengage when road conditions allow. See Cruise Control for more information.

    Traction Control System (TCS)
    The vehicle has a Traction Control System (TCS) that limits wheel slip. The system operates if it senses that one or both of the front wheels are slipping or beginning to lose traction. When ...

    Limited-Slip Differential
    Vehicles with a limited-slip differential can give more traction on snow, mud, ice, sand, or gravel. It works like a standard differential most of the time, but when traction is low, this fea ...

    See also:

    Important safety notes
    WARNING Always remember that you must concentrate primarily on driving the vehicle. The driver's concentration must always be directed primarily at road traffic. For your own safety and t ...

    Setting the 12/24 Hour Format
    1. Press the CONFIG button and select Time and Date Settings, or press . 2. Highlight Set Time Format. 3. Press SELECT to select the 12 hour or 24 hour display format. ...

    Operating tips
    ● Say a command after the tone. Voice commands cannot be accepted when the icon is . ● If the command is not recognized, the system repeats the announcement. Repeat the command in a c ...