Buick Regal: StabiliTrak® System
The vehicle may have a vehicle stability enhancement system called StabiliTrak. It is an advanced computer-controlled system that assists with directional control of the vehicle in difficult driving conditions.
StabiliTrak activates when the computer senses a difference between the intended path and the direction the vehicle is actually traveling. StabiliTrak selectively applies braking pressure to the vehicle brakes to help steer the vehicle in the intended direction.
StabiliTrak comes on automatically whenever the vehicle is started.
To assist with directional control of the vehicle, the system should always be left on.
When StabiliTrak activates, flashes on the instrument panel.
A noise may be heard or vibration may be felt in the brake pedal.
This is normal. Continue to steer the vehicle in the intended direction.
See Traction Control System (TCS)/ StabiliTrak® Light for more information.
If a problem is detected with StabiliTrak, SERVICE STABILITRAK is displayed on the Driver Information Center (DIC).
See Ride Control System Messages . When this message is displayed and comes on and stays on, the vehicle is safe to drive but the system is not operational.
Driving should be adjusted accordingly.
If comes on and stays on, reset the system.
To reset:
1. Stop the vehicle.
2. Turn the engine off and waiting 15 seconds.
3. Start the engine.
If still comes on and stays on, the vehicle needs service.
With Interactive Drive Control System
Without Interactive Drive Control System
► To turn off both StabiliTrak and TCS, press and hold the TCS/ StabiliTrak button, located on the instrument panel, until and illuminate and the appropriate DIC message is displayed.See Ride Control System Messages .
When StabiliTrak is turned off, the system will not assist with directional control of the vehicle or limit wheel spin. Driving should be adjusted accordingly.
See StabiliTrak® OFF Light for more information.
► Press and release the TCS/ StabiliTrak button again to turn the system back on.If cruise control is being used when StabiliTrak activates, cruise control will automatically disengage.
Press the cruise control button to reengage when road conditions allow. See Cruise Control for more information.
Traction Control System (TCS)
The vehicle may have a Traction Control System (TCS) that limits wheel slip. The system operates if it senses that one or both of the front wheels are slipping or beginning to lose traction. When this ...Interactive Drive Control System
The vehicle may have the Interactive Drive Control System (IDCS). IDCS adapts to the driving style and preference of the driver within one of three driving modes: Standard: Use for normal city and ...See also:
Owner's Manual/Service Manual order information
A genuine NISSAN Service Manual is the best source of service and repair information
for your vehicle. Filled with wiring diagrams, illustrations and step-by-step diagnostic
and adjustment procedu ...
S mode
●When the shift range is “4” or lower, holding the shift lever toward “+”
sets
the shift range to “6”.
●To prevent the engine from over-revving, upshifting may automatical ...
Rear Vision Camera Location
The camera is located above the
license plate.
The area displayed by the camera is
limited. It does not display objects
that are close to either corner or
under the bumper and can vary
de ...