Subaru Legacy: START
CAUTION
Do not turn the ignition switch to the “START” position while the engine is running.
The engine is started in this position. The starter cranks the engine to start it. When the key is released (after the engine has started), the key automatically returns to the “ON” position.
If the engine does not start with your registered key, pull out the key once (at this time, the security indicator light will blink), wait for at least 10 seconds, reinsert the key in the ignition switch and then try to start the engine again.
NOTE
The engine may not start in the following cases:
● The key grip is touching another key or a metallic key holder.
● The key is near another key that contains an immobilizer transponder.
● The key is near or touching another transmitter.
ON
This is the normal operating position after the engine is started. ...Key reminder chime
The reminder chime sounds when the driver’s door opens and the key is in the “LOCK” or “Acc” positions. The chime stops when the ignition switch is turned to the “ON” position or the ...See also:
Power Reclining Seatbacks
Power Reclining Seatbacks
To adjust a power seatback,
if equipped:
• Tilt the top of the control
rearward to recline.
• Tilt the top of the control forward
to raise. ...
Blizzard Conditions
Being stuck in snow can be a
serious situation. Stay with the
vehicle unless there is help nearby.
If possible, use the Roadside
Assistance Program (U.S. and
Canada) or Roadside
Assistance ...
Parking brake
WARNING
Engaging the parking brake while the vehicle
is in motion can cause the rear wheels to lock
up. You could lose control of the vehicle and
cause an accident. In addition, the vehicle ...