Toyota Camry: Stopping the engine - Engine (ignition) switch (vehicles with a smart key system) - Driving procedures - When driving - Toyota Camry Owners ManualToyota Camry: Stopping the engine

  1. Stop the vehicle.
  2. Shift the shift lever to P.
  3. Set the parking brake.
  4. Release the brake pedal.
  5. Press the “ENGINE START STOP” switch.
  6. Check that the smart key system indicator light (green) is off.
    Starting the engine
    Check that the parking brake is set. Check that the shift lever is set in P. If the shift lever is not set in P, the engine may not be started. Firmly depress the brake pedal. The smart key ...

    Changing “ENGINE START STOP” switch modes
    Modes can be changed by pressing the “ENGINE START STOP” switch with brake pedal released. (The mode changes each time the switch is pressed.) Off* The emergency flashers can be used. T ...

    See also:

    D (Drive)
    This position is for normal driving. The transmission automatically shifts into a suitable gear according to the vehicle speed and the acceleration you require. When more acceleration is required ...

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences ...

    Conversions and Add-Ons
    Add-On Electrical Equipment Notice: Do not add anything electrical to the vehicle unless you check with your dealer first. Some electrical equipment can damage the vehicle and the damage would not b ...