Buick LaCrosse: Storing a Flat or Spare Tire and 
Tools With a Screw in Fastener - Tire Changing - Wheels and Tires - Vehicle Care - Buick LaCrosse Owners ManualBuick LaCrosse: Storing a Flat or Spare Tire and Tools With a Screw in Fastener

1. Turn the wrench

1. Turn the wrench counterclockwise to remove the fastener.

2. Replace the fastener with the one provided in the foam.

3. Turn the wrench clockwise to tighten the fastener.

4. Replace the foam, jack and tools, and the tire.

5. Turn the retainer nut clockwise to secure the tire.

6. Place the floor cover on the wheel.

    Storing a Flat or Spare Tire and Tools
    WARNING! Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Stor ...

    Storing a Flat or Spare Tire and Tools With a Slide In Fastener
    1. If the flat tire is larger than the spare tire, use the longer mounting bolt. 2. Slide the shorter bolt to remove it from the floor and insert the longer one. 3. Replace the jack and to ...

    See also:

    Location of taillight bulbs
    Brake lights (LEDs) Brake light Backup light Turn signals Rear fog light (driver’s side only) NOTE If an error message remains in the display after a faulty bulb has been repla ...

    Socket for OBD Onboard Diagnosis
    There is an OBD socket on the driver's side for checking the primary components in the vehicle emissions. Emissions ▷ The warning lamp lights up: Emissions are deteriorating. Have th ...

    WindshieldWipers and Washer
    The ignition must be switched ON. WARNING: Use only windshield washer fluid or plain water in the reservoir: Using radiator antifreeze as washer fluid is dangerous. If sprayed on the windshield, ...