Mercedes-Benz E-Class: Storing and maintaining the current speed
You can store the current speed if you are driving faster than 20 mph (30 km/h).
•► Accelerate the vehicle to the desired speed.
•► Briefly press the cruise control lever up 1 or down 2.
•► Remove your foot from the accelerator pedal.
Cruise control is activated. The vehicle automatically maintains the speed.
Cruise control may be unable to maintain the stored speed on uphill gradients. The stored speed is resumed when the gradient evens out. Cruise control maintains the stored speed on downhill gradients by automatically applying the brakes.
Cruise control lever
1. To switch on or to increase the speed 2. To switch on or to reduce the speed 3. To deactivate cruise control 4. To switch on with the current speed or with the last stored speed Wh ...Storing the current speed or calling up the last stored speed
WARNING The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from ...See also:
If your engine overheats
In any of the following situations, you can reduce thepotential for overheating
by taking the appropriate action.
• On the highways — Slow down.
• In city traffic — While stopped, put tran ...
Operating Instructions — Radio Mode
NOTE:
The ignition switch must be in the ON or ACC
position to operate the radio.
Power Switch/Volume Control (Rotary)
Push the ON/VOLUME control knob to turn on the
radio. Push the ON/VOLUME c ...
Turning ACC off completely
From standby mode, press once.
From active mode, press twice.
The set speed and time interval are then cleared from the system's memory and
cannot be resumed by pressing . ...