Volvo S60: Summary - Using PAC - Rear Park Assist Camera (PAC)* - Comfort and driving pleasure - Volvo S60 Owners ManualVolvo S60: Summary

  • The camera is activated when the gear selector is moved to R (this can be changed in the MY CAR menu) and the image is shown on the center console display.
  • When backing up, two solid lines are projected on the screen to show the path that the vehicle's rear wheels will take. These lines are affected by movements of the steering wheel. The vehicle's approximate outer dimension are shown by two dashed lines.
  • The graphic lines will not be displayed when backing up with a trailer that is connected to the vehicle's electrical system.
  • Objects on the ground that are closer than 1 ft (30 centimeters) cannot be detected by the camera.
  • The camera is active for approx. 5 seconds after the gear selector is moved to R or until the vehicle's speed exceeds 6 mph (10 km/h).
  • The optional Park Assist sensors and the parking camera work together and information from the sensors is shown graphically on the display.
  • The graphic lines shown on the screen when the vehicle backs up can be disabled in the settings menu.
  • Manual zoom can be selected in the MY CAR menu.
  • The system can be switched off by pressing CAM. By default, the system is activated when the gear selector is moved to R. This setting can be changed in the in MY CAR menu.
  • If there are two cameras installed on the vehicle*, to switch between cameras, turn TUNE (at least one of the cameras has to be active), press CAM repeatedly or use the center console controls. If the front camera is on, it overrides the optional park assist system's visual indicator but there will still be an audible signal.
    Settings
    Press OK/MENU when a normal camera view is displayed and make the desired settings. Parking camera settings Mark Park Assist lines to display the sidelines while backing up. Mark Distance info ...

    Limitations
    Even if a fairly small section of the screen image appears to be obstructed, this may mean that a relatively large area behind the vehicle is hidden and objects there may not be detected until the ...

    See also:

    Using the Directory Command
    The directory command lists all of the name tags stored by the system. To use the directory command: 1. Press . ► For vehicles without a navigation system, the system responds “Ready,” f ...

    Specifications
    These specifications are subject to change without notice. ...

    Tires
    Problem Possible causes/consequences and •► Solutions USA only: The yellow tire pressure monitor warning lamp (pressure loss/ malfunction) is lit. Canada only: The ye ...