Mercedes-Benz E-Class: Switching on Night View Assist Plus
Depending on your vehicle's date of
manufacture, the 
or
symbol for
the "Automatic driving lights/daytime
running lamps" position is located on the light
switch.
You can only activate Night View Assist Plus if:
- the SmartKey is in position 2 in the ignition
lock.
- it is dark.
- the light switch is set to either
,
or
.
- reverse gear has not been engaged.
•► Make sure that COMAND is switched on.
•► Press button 1.
The Night View Assist Plus display appears in the COMAND display.
1. Night View Assist Plus display
2. Pedestrian recognized
3. Framing
4. Symbol for active pedestrian recognition
You can read about how to adjust the brightness of the COMAND display in the COMAND operating instructions.
The infrared lamps switch on automatically from a speed of about 6 mph (10 km/h). This means that you do not have the full visual range while the vehicle is stationary and cannot check whether Night View Assist Plus is working.
Important safety notes
In addition to the illumination provided by the
normal headlamps, Night View Assist Plus
uses infrared light to illuminate the road. The
Night View Assist Plus camera picks up the
infrared lig ...
Pedestrian recognition
WARNING
Pedestrian recognition may be impaired or
inoperative if:
- pedestrians are partially or entirely
obscured by objects, e.g. parked vehicles.
- the silhouette of the pede ...
See also:
If the “S” indicator does not come on or the “D” indicator is displayed
even after shifting the shift lever to S
This may indicate a malfunction in the automatic transmission system. Have
the vehicle inspected by your Toyota dealer immediately.
(In this situation, the transmission will operate in the same man ...
Anti-entrapment function
When the moonroof senses a substantial enough object trapped between its glass
and the vehicle’s roof during closure, it automatically moves back to the fully
open position and stops there. The ...
