BMW 5 Series: Switching on/off and interrupting 
cruise control - Active Cruise Control with 
Stop & Go function, ACC - Driving comfort - Controls - BMW 5 Series Owners ManualsBMW 5 Series: Switching on/off and interrupting cruise control

Switching on

wheel. Press the button on the steering wheel.

The indicator lamps in the instrument cluster light up and the mark in the speedometer is set to the current speed.

Cruise control can be used.

Switching off

If the system is deactivated or interrupted, Deactivated or interrupted system
If the system is deactivated or interrupted, actively intervene by braking and, if necessary, with evasive maneuvers; otherwise, there is the danger of an accident occurring.◀

If switching off the system while stationary, press on the brake pedal at the same time.

▷ If active: press twice. Press the button.

▷ If active: press twice.
▷ If interrupted: press once.

The displays go out. The stored desired speed and distance are deleted.

Interrupting

If interrupting the system while stationary, press When active, press the button.

If interrupting the system while stationary, press on the brake pedal at the same time.

The system is automatically interrupted if:

▷ The brakes are applied.
▷ The clutch pedal is depressed.
▷ Transmission position D is disengaged.
▷ DTC Dynamic Traction Control is activated or DSC is deactivated.
▷ DSC is actively controlling stability.
▷ The safety belt and the driver's door are opened when the vehicle is standing.
▷ The system has not detected objects for an extended period, e.g., on a road with very little traffic without road edge line markings.
▷ Radar sensor is soiled.

    Buttons at a glance
    1. System on/off, interrupt 2. Resume speed 3. Store speed 4. Reduce distance 5. Store, maintain/change speed 6. Increase distance ...

    Maintaining/storing the speed
    Press the button. When the system is switched on, the current speed is maintained and stored as the desired speed. It is displayed in the speedometer and briefly displayed in the instrument c ...

    See also:

    Adjusting the Treble, Midrange, and Bass
    1. Press the TONE button. 2. Select Treble, Midrange, or Bass. 3. Select the value. Press the BACK button to go back to the Tone Settings menu. ...

    Settings
    Press OK/MENU when a normal camera view is displayed and make the desired settings. Parking camera settings Mark Park Assist lines to display the sidelines while backing up. Mark Distance info ...

    If the light illuminates constantly
    If the light illuminates constantly while driving or does not turn off after the engine starts, an emission control system malfunction has been detected. You should have your vehicle checked by an ...