BMW 5 Series: Switching the warning function on/off - Collision warning with braking function - Driving comfort - Controls - BMW 5 Series Owners ManualsBMW 5 Series: Switching the warning function on/off

Press the button

▷ On: the LED lights up. Press the button

▷ On: the LED lights up.
▷ Off: the LED goes out.

The state is stored for the remote control currently in use.

    Warning stages
    Prewarning This warning is issued, for example, when there is the impending danger of a collision or the distance to the vehicle ahead is too small. Acute warning with braking function Warning ...

    Configuring the prewarning
    After the warning function is switched on, the following can be set via the iDrive: ▷ The prewarning can be switched on/off. ▷ The time of the prewarning can be set. These settings ha ...

    See also:

    Trunk release
    Trunk ReleaseButton Use the Remote Keyless Entry (RKE)transmitter to open the trunk fromoutside the vehicle. From inside thevehicle the trunk lid can be released bypressing the TRUNK RELEASE bu ...

    Tire pressures and wear
    Maintaining the correct tire pressures helps to maximize the tires’ service lives and is essential for good running performance. Check and, if necessary, adjust the pressure of each tire (includ ...

    Storing Button Memory Positions
    To save positions into Button Memory: 1. Adjust the driver seat, seatback recliner, and both outside mirrors to the desired driving positions. 2. Press and hold MEM (Memory) and “1” at t ...