Nissan Maxima: Technical and consumer information
- Capacities and recommended fuel/lubricants
- Fuel recommendation
- Engine oil and oil filter recommendations
- Air conditioner system refrigerant and oil recommendations
- Specifications. Engine
- Specifications. Wheels and tires
- Specifications. Dimensions and weights
- When traveling or registering your vehicle in another country
- Vehicle identification number (VIN) plate
- Vehicle identification number (chassis number)
- Engine serial number
- F.M.V.S.S./C.M.V.S.S. certification label
- Emission control information label
- Tire and loading information label
- Air conditioner specification label
- Installing front license plate
- Vehicle loading information
- Terms
- Vehicle load capacity
- Loading tips
- Measurement of weights
- Towing a trailer
- Maximum load limits
- Maximum Gross Vehicle Weight (GVW)/Maximum Gross Axle Weight (GAW)
- Towing load/specification
- Towing safety
- Flat towing
- Uniform tire quality grading
- Emission control system warranty
- Reporting safety defects (US only)
- Readiness for inspection/maintenance (I/M) test
- Event Data Recorders (EDR)
- Owner's Manual/Service Manual order information
- In the event of a collision
Changing wheels and tires
Tire rotation NISSAN recommends rotating the tires every 7,500 miles (12,000 km). See Flat tire in the In case of emergency section of this manual for tire replacing procedures. As soon a ...Capacities and recommended fuel/lubricants
The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the Maintenance and do-it-yourself section to de ...See also:
SPORT
Consistently sporty tuning of the suspension for
greater driving agility with maximum driving stabilization.
The program can be configured to individual
specifications.
The configuration is stor ...
Functions
NOTE
If a warning message appears while you are using the trip computer, this message
must be acknowledged in order to return to the trip computer function. Acknowledge
a message by pressing ...
Visual warning
The approach of the vehicle to an object can be
shown on the Control Display.
When the distance to an object is small, a red bar
is shown in front of the vehicle, as it is in the PDC
display.
...