Buick LaCrosse: Timer
This display can be used as a timer.
To start the timer, press SET/CLR while Timer is displayed. The display will show the amount of time that has passed since the timer was last reset, not including time the ignition is off. Time will continue to be counted as long as the ignition is on, even if another display is being shown on the DIC. The timer will record up to 99 hours, 59 minutes, and 59 seconds (99:59:59) after which the display will return to zero.
To stop the timer, press SET/CLR briefly while Timer is displayed. To reset the timer to zero, press and hold SET/CLR.
Average Vehicle Speed
This display shows the average
speed of the vehicle in miles per
hour (mph) or kilometers per
hour (km/h). This average is
calculated based on the various
vehicle speeds recorded since the
...
Navigation
This display is used for the OnStar
or Navigation System Turn-by-Turn
guidance. See OnStar Overview or the navigation manual,
if the vehicle has navigation, for
more information. ...
See also:
Last destinations
At a glance
The destinations previously entered are stored
automatically.
The destinations can be called up and used as a
destination for destination guidance.
Calling up the last destination
...
Error Messages
If Disc Read Error displays and/or
the disc comes out, it could be for
one of the following reasons:
• The disc has an invalid or
unknown format.
• The disc is not from a correct
region. ...
Switching off
The system can be deactivated as follows:
▷ Press the button.
▷ Switch off the ignition. ...
