Mercedes-Benz E-Class: Tire size designation, load-bearing 
capacity and speed rating - Tire label - Wheels and tires - Mercedes-Benz E-Class Owners ManualMercedes-Benz E-Class: Tire size designation, load-bearing capacity and speed rating

1. Tire width

1. Tire width
2. Nominal aspect ratio in %
3. Tire code
4. Rim diameter
5. Load bearing index
6. Speed rating

Tire data is vehicle-specific and may deviate from the data in the example

General: depending on the manufacturer's standards, the size imprinted in the tire wall may not contain any letters or may contain one letter that precedes the size description.

If there is no letter preceding the size description (as shown above): these are passenger vehicle tires according to European manufacturing standards.

If "P" precedes the size description: these are passenger vehicle tires according to U.S.

manufacturing standards.

If "LT" precedes the size description: these are light truck tires according to U.S.

manufacturing standards.

If "T" precedes the size description: these are compact emergency spare wheels at high tire pressure, to be used only temporarily in an emergency.

Tire width: tire width 1 shows the nominal tire width in millimeters.

Nominal aspect ratio: aspect ratio 2 is the size ratio between the tire height and the tire width and is shown in percent. The aspect ratio is calculated by dividing the tire width by the tire height.

Tire code: tire code 3 specifies the tire type.

"R" represents radial tires. "D" represents diagonal tires, "B" represents diagonal radial tires.

Optionally, tires with a maximum speed of over 149 mph(240 km/h) may have "ZR" in the size description depending on the manufacturer (e.g. 245/40 ZR 18).

Rim diameter: rim diameter 4 is the diameter of the bead seat, not the diameter of the rim flange. The rim diameter is specified in inches (in).

Load bearing index: load bearing index 5 is a numerical code which specifies the maximum load-bearing capacity of a tire.

WARNING
The tire load rating must always be at least half of the GAWR of your vehicle. Otherwise, sudden tire failure may be the result which could cause an accident and/or serious injury to you or others.

Always replace rims and tires with rims and tires having the same specifications (designation, manufacturer and type) as shown on the original part.

WARNING
Do not overload the tires by exceeding the specified load limit as indicated on the Tire and Loading Information placard on the driver's door B-pillar. Overloading the tires can overheat them, possibly causing a blowout. Overloading the tires can also result in handling or steering problems, or brake failure.

Example:

The load bearing index 91 is equivalent to a maximum load of 1356 lbs (615 kg) that the tire can carry. For further information on the maximum tire load in kilograms and pounds

For further information on the load bearing index, see Load index

Speed rating: speed rating 6 specifies the approved maximum speed of the tire.

WARNING
Even when permitted by law, never operate a vehicle at speeds greater than the maximum speed rating of the tires.

Exceeding the maximum speed for which tires are rated can lead to sudden tire failure, causing loss of vehicle control and possibly resulting in an accident and/or serious personal injury and possible death, for you and for others.

Regardless of the speed rating always observe the speed limits. Drive carefully and adapt your driving style to the traffic conditions.

Summer tires

Tire labeling overview
The following markings are on the tire in addition to the tire name (sales designation) and the manufacturer's name: 1. Uniform tire Quality Grading Standard 2. DOT, Tire Identification Num ...

Summer tires
 - Optionally, tires with a maximum speed of over 149 mph (240 km/h) may have "ZR" in the size description depending on the manufacturer (e.g. 245/40 ZR 18). The service specif ...

See also:

BAS PLUS (Brake Assist System Plus)
BAS PLUS is only available in vehicles equipped with DISTRONIC PLUS. Observe the "Important safety notes" section At speeds above approximately 4 mph (7 km/h), BAS PLUS assists you w ...

Installing top tether strap
First, secure the child restraint with the LATCH lower anchors (rear outboard seat positions only) or the seat belt, as applicable. 1. Flip up the anchor cover 1 from the anchor point which is l ...

Important safety notes
The use of seat belts and infant and child restraint systems is required by law in all 50 states, the District of Columbia, the U.S. territories and all Canadian provinces. Even where this is no ...